Battery knowledge · Stationary, industrial and product standards
IEC 62620
The performance standard for industrial lithium cells and batteries: how to measure and declare capacity, endurance, internal resistance and self-discharge, so that datasheets from different makers can be compared.
Example
Stationary, industrial and product standards: an example situation
A cell-level test does not establish fire performance or commissioning requirements for a complete installation.
Read IEC 62620 alongside Capacity test in this context. A defined capacity test with specified charge, rest, discharge and cutoff conditions, usually a full CC-CV charge, a rest, and a C/3 or lower discharge to the lower cutoff at 25 °C. The delivered ampere-hours are the cell’s measured capacity.
Use in Lemonergy
Match scope to product and installation.
This is a reference concept. No executable Lemonergy block has been verified for this term.
References & further reading
Further reading on this topic
These sources provide broader context; they are not presented as citations for every statement in this entry.
- IEC 62619:2022 — Safety requirements for secondary lithium cells and batteries, for use in industrial applications
International Electrotechnical Commission · 2022
Topic background · Industrial and stationary lithium-battery safety scope; excludes road vehicles where their dedicated standard applies.
- Energy Storage System Testing and Certification
UL Solutions
Topic background · System safety scope of UL 9540 and relationships to battery and power-conversion standards.