Battery knowledge · Charging infrastructure
Charging curve
The power a vehicle actually accepts against its state of charge during a fast charge: high at low SOC, stepping down as the cells approach voltage and plating limits. The area under it, not the peak kilowatts, decides how long a stop takes.
- Unit
- kW
Example
Compare charging profiles
Current holds at 5 A until the example 4.15 V threshold; voltage then holds while current tapers. The stop marker is a separate low-current termination condition.
Positive current charges the cell. Time is normalized; selected thresholds are not cell-specific recommendations. The voltage trace ends at termination; post-stop relaxation is excluded.
Explore the graph
See which quantity is held constant, when the phase changes and how charging ends.
Current holds at 5 A until the example 4.15 V threshold; voltage then holds while current tapers. The stop marker is a separate low-current termination condition.
CC: I = I_set · CV: V = V_limit
Illustrative model. Positive current charges the cell. Time is normalized; selected thresholds are not cell-specific recommendations. The voltage trace ends at termination; post-stop relaxation is excluded.
Use in Lemonergy
Lemonergy Studio blocks
Build CC–CV charging
Native current and voltage regulation act against an explicit battery.
Blocks to use
- Charging schedule and target policy
Permits charging
Inputs & settings
- strategy
- targetSoc
- departureS
- soc, available, chargerDone → permit
- Regulated CC/CV charger
Regulates current and voltage
Inputs & settings
- currentA
- voltageV
- cutoffCurrentA / cutoffHoldS
- Electrical ports p and n
- Battery with SOC-dependent OCV
Stores charge and supplies terminal voltage
Inputs & settings
- capacityAh
- initialSoc
- emptyVoltageV / fullVoltageV
- resistanceOhm
- Electrical ports p and n
- Electrical reference
Sets zero potential
Inputs & settings
- Connect p to reference net
This overview identifies the components to use. Follow the example in Lemonergy for their connections and settings.
Example. An illustrative 100 Ah battery with a 420 V ceiling can use a 32 A cap. At the ceiling, current falls as OCV rises.
Observe. Completion needs current below cutoff at the CV ceiling for the configured dwell. Site-limited low current is different.
The battery uses linear OCV and fixed resistance. It does not automatically add aging, thermal dynamics or balancing.
Open the Studio example →References & further reading
Further reading on this topic
These sources provide broader context; they are not presented as citations for every statement in this entry.
- Electric Vehicle Charging Stations
U.S. Department of Energy, Alternative Fuels Data Center
Topic background · U.S. charging equipment levels, charging infrastructure and connector context. Regional terminology varies.