Battery knowledge · Data, communication and electronics
MOSFET
A transistor switched by the voltage on its gate, with an on-resistance of milliohms or less in power parts. Low-voltage packs use back-to-back pairs as charge and discharge switches, since each conducts backwards through its body diode; BMS chips use small ones for balancing, and silicon-carbide MOSFETs switch 800 V inverters.
- Also called
- metal–oxide–semiconductor field-effect transistor, power MOSFET
Example
Data, communication and electronics: an example situation
2500 in a log might mean 25.00 °C, 2.5 V or raw counts. Units and scale must accompany the value.
Read MOSFET alongside Buck and boost converters in this context. Switch-mode circuits that step a DC voltage down (buck) or up (boost) using a fast switch, an inductor and a capacitor, often above 95% efficient. With transistors in place of diodes the same circuit runs both ways, charging a battery from a bus or discharging into it, as in stationary storage and on-board boosters that let 800 V cars use 400 V chargers.
Use in Lemonergy
Separate quantities from encoding and transport.
This is a reference concept. No executable Lemonergy block has been verified for this term.
References & further reading
Further reading on this topic
These sources provide broader context; they are not presented as citations for every statement in this entry.
- 3rd generation of the CAN data link layer
CAN in Automation, CAN Newsletter · 2020
Topic background · Classical CAN, CAN FD and CAN XL data-link concepts; publication describes the 2020 state.
- Getting Started with the BQ76925
Texas Instruments · 2019
Topic background · A concrete BMS analog front-end example: cell voltage, current, temperature measurement and MCU integration.