AB battery system

Example

Use in Lemonergy

Make series/parallel architecture explicit.

This is a reference concept. No executable Lemonergy block has been verified for this term.

Connected concepts

Related concepts from the knowledge graph. Connections show context, not cause and effect. Hover or focus a linked term for its definition.

Battery management system

The electronics and software that keep a battery inside its safe window: measuring every cell voltage and many temperatures, estimating SOC and SOH, balancing cells, computing current limits, controlling the contactors and reporting over the vehicle network.

LFP

A positive electrode material, LiFePO₄, giving cells a nominal voltage around 3.2 V, long cycle life and good thermal stability, but less energy per kilogram than nickel-rich oxides. Its flat voltage curve makes state of charge hard to read from voltage alone.

NMC

A family of layered-oxide positive electrode materials, LiNiₓMnᵧCo₁₋ₓ₋ᵧO₂, used in many electric-vehicle cells. Variants are named by their metal ratio: NMC811 has eight parts nickel to one each of manganese and cobalt.

OCV–SOC curve

The characteristic relation between a cell’s open-circuit voltage and its state of charge, measured once at low current and stored in the BMS. A steep curve, as for NMC, makes SOC easy to read from voltage; LFP’s flat curve does not.

Battery pack

The complete battery as installed: modules or cells, the BMS, contactors and fuses, busbars, cooling, sensors and an enclosure. Its energy is the sum of its cells’ energies; its mass and volume are a good deal more.

Sodium-ion battery

A cell built like a lithium-ion cell but shuttling sodium ions, usually between a hard-carbon negative electrode and a layered oxide or Prussian-blue positive. It uses no lithium, cobalt or copper, at the cost of lower energy density.

References & further reading

Further reading on this topic

These sources provide broader context; they are not presented as citations for every statement in this entry.

1. Extended Kalman filtering for battery management systems of LiPB-based HEV battery packs: Part 2. Modeling and identification

   Gregory L. Plett · Journal of Power Sources · 2004

   Topic background · Battery charge balance, open-circuit voltage, ohmic loss, polarization dynamics and model identification; parameters require cell-specific data.

2. Getting Started with the BQ76925

   Texas Instruments · 2019

   Topic background · A concrete BMS analog front-end example: cell voltage, current, temperature measurement and MCU integration.