LFP

Example

Use in Lemonergy

Separate chemistry from form factor.

This is a reference concept. No executable Lemonergy block has been verified for this term.

Learn it in Lesson 1 · Cell anatomy →

Connected concepts

Related concepts from the knowledge graph. Connections show context, not cause and effect. Hover or focus a linked term for its definition.

Cathode active material

The lithium-containing compound in the positive electrode — NMC, NCA, LFP or LCO powder — that supplies the cell’s cyclable lithium. It is the most expensive material in most cells and sets the nominal voltage and much of the energy density.

Cycle life

The number of full charge–discharge cycles a cell completes before its capacity falls to a stated fraction, usually 80 %, of its initial value under defined conditions. LFP cells reach several thousand cycles; high-energy NMC fewer.

LMFP

Lithium iron phosphate with part of the iron replaced by manganese, which lifts the average voltage to about 3.8 V and so the energy density by 10–20 % while keeping most of LFP’s safety and cost advantages.

NMC

A family of layered-oxide positive electrode materials, LiNiₓMnᵧCo₁₋ₓ₋ᵧO₂, used in many electric-vehicle cells. Variants are named by their metal ratio: NMC811 has eight parts nickel to one each of manganese and cobalt.

OCV–SOC curve

The characteristic relation between a cell’s open-circuit voltage and its state of charge, measured once at low current and stored in the BMS. A steep curve, as for NMC, makes SOC easy to read from voltage; LFP’s flat curve does not.

References & further reading

Technical references

1. A reflection on lithium-ion battery cathode chemistry

   Arumugam Manthiram · Nature Communications · 2020

   Technical reference · Layered oxides, spinels and polyanion cathodes; links between composition, structure and performance.