XCP

Example

Use in Lemonergy

Separate quantities from encoding and transport.

This is a reference concept. No executable Lemonergy block has been verified for this term.

Connected concepts

Related concepts from the knowledge graph. Connections show context, not cause and effect. Hover or focus a linked term for its definition.

A2L file

The ASAM description of a controller’s internal measurement and calibration variables — names, memory addresses, data types and conversions — that tools need to read or tune them over XCP. It is generated with each firmware build and must match it exactly.

CAN bus

The serial network over which a BMS talks to the vehicle or inverter: a two-wire differential bus, defined in ISO 11898, carrying short prioritised messages at up to 1 Mbit/s, or faster with CAN FD. Every node hears every message, and a dominant bit wins arbitration without any collision.

Electronic control unit

The general name for any controller on a vehicle network — BMU, VCU, CCU and motor controller are all ECUs. Each has its own address, firmware, diagnostic services and calibration data.

MDF4

The ASAM standard binary format for measurement data, version 4 with the .mf4 extension: it stores decoded signals and raw bus frames side by side with their units, conversions and timestamps, compressed and indexed so large logs open quickly. It is the common exchange format for vehicle and battery test data.

References & further reading

Further reading on this topic

These sources provide broader context; they are not presented as citations for every statement in this entry.

1. 3rd generation of the CAN data link layer

   CAN in Automation, CAN Newsletter · 2020

   Topic background · Classical CAN, CAN FD and CAN XL data-link concepts; publication describes the 2020 state.

2. Getting Started with the BQ76925

   Texas Instruments · 2019

   Topic background · A concrete BMS analog front-end example: cell voltage, current, temperature measurement and MCU integration.