lemonergy· battery engineering courses

Lemonergy · Studio block

Sine wave function

Evaluates a sinusoid using a connected time value.

Implementation ID
native-sine-function
Reviewed
2026-10-27

Behavior

y(u) = bias + amplitude × sin(2π frequency u + phase). The worked example connects this operation to signals in Lemonergy Studio.

Interface

Sine wave function interfaceInputs or arguments on the left, observed outputs on the right. Conserving terminals appear below the component. The tables give units and behavior.Sine wave functionStudio blockin0out0
Original Lemonergy interface view. Lines identify ports; they are not a completed simulation circuit.
Ports and observed outputs
NameDirectionUnitMeaning
in0input1Time; real scalar.
out0output1Sine; real scalar.

Parameters

Defaults are initial model values. Select values for your own model and operating conditions.

Configuration fields
ParameterUnitDefaultMeaning and limits
Amplitude
params[0]		12Configured finite numerical parameter.
Frequency
params[1]		Hz1Configured finite numerical parameter.
Phase
params[2]		rad0Configured finite numerical parameter.
Bias
params[3]		11Configured finite numerical parameter.

Equations and rules

  • y(u) = bias + amplitude × sin(2π frequency u + phase)

Worked example

Sine wave function — worked example

Time = 0.25. Sine at 0 s = 3.

Open Studio example after release →
Numerical checks for the bundled synthetic example
OutputTime (s)Expected valueUnitAbsolute tolerance
Sine
out0		0311e-08

Explore the recorded outputs

Sine wave function recorded example

Sine wave function
Sine wave function against timeRecorded synthetic simulation values. Time in seconds; output in —.2.502.750.2530.53.250.753.51—Time (s)
Sine wave function: 3 — at 0 s

2 actual recorded samples. Lines are visual guides between samples. Synthetic example, not measured cell data.

Download the recorded samples (JSON) · Open this Studio example after release

Use in a workflow

Sine wave function — worked example

Evaluates a sinusoid using a connected time value.

  1. Sine wave function: y(u) = bias + amplitude × sin(2π frequency u + phase). The worked example connects this operation to signals in Lemonergy Studio.
    • Use the block reference for settings and connections.
    • Implementation tested locally; public release pending.
Open Studio example after release

Connected concepts

Limits and interpretation

  • Shapes and element types are explicit. Values must be finite; automatic reshaping and unit conversion are not performed.

Reference basis

This software operation and its numerical conventions are defined by the public contract and worked example; no external research result is claimed.

Implementation sources

This reference follows the public interface and locally verified numerical checks for an upcoming release.

Contract: Lemonergy Studio public contract · Verification record: verification-2026-10-27

  • docs/glossary/native-block-verification.json

This implementation and its workflow uses (JSON) · Knowledge graph (JSON-LD)