Lemonergy · Studio block

Signal scope

Plots the connected signal from the engine trace. Every array element has its own named trace channel.

Behavior

The input passes through unchanged and the Studio chart plots each output channel against simulation time.

Original Lemonergy interface view. Lines identify ports; they are not a completed simulation circuit.

Ports and observed outputs
Name	Direction	Unit	Meaning
`in0`	input	1	Signal; real 3 array.
`out0`	output	1	Observed signal; real 3 array.

No configurable parameters for this component.

Signal = [2,4,6]. Observed signal at 0 s = [2,4,6].

Numerical checks for the bundled synthetic example
Output	Time (s)	Expected value	Unit	Absolute tolerance
Observed signal `out0`	0	`[2, 4, 6]`	1	1e-09

Signal scope [1]

Signal scope [1]: 2 — at 0 s

2 actual recorded samples. Lines are visual guides between samples. Synthetic example, not measured cell data.

Plots the connected signal from the engine trace. Every array element has its own named trace channel.

Signal scope: The input passes through unchanged and the Studio chart plots each output channel against simulation time.
- Use the block reference for settings and connections.
- Implementation tested locally; public release pending.

This software operation is defined by its public contract and worked example; no external research result is claimed.

This reference follows the public interface and locally verified numerical checks for an upcoming release.

Contract: Lemonergy Studio public contract · Verification record: verification-2026-10-27