Lemonergy · Studio block

Dynamic saturation

Clips a signal to connected lower and upper bounds.

Behavior

y = clamp(u, connected lower, connected upper). The worked example connects this operation to signals in Lemonergy Studio.

Original Lemonergy interface view. Lines identify ports; they are not a completed simulation circuit.

Ports and observed outputs
Name	Direction	Unit	Meaning
`in0`	input	1	Value; real scalar.
`in1`	input	1	Lower; real scalar.
`in2`	input	1	Upper; real scalar.
`out0`	output	1	Limited; real scalar.

No configurable parameters for this component.

Value = 5; Lower = 0; Upper = 3. Limited at 0 s = 3.

Numerical checks for the bundled synthetic example
Output	Time (s)	Expected value	Unit	Absolute tolerance
Limited `out0`	0	`3`	1	1e-08

Dynamic saturation

Dynamic saturation: 3 — at 0 s

2 actual recorded samples. Lines are visual guides between samples. Synthetic example, not measured cell data.

Clips a signal to connected lower and upper bounds.

Dynamic saturation: y = clamp(u, connected lower, connected upper). The worked example connects this operation to signals in Lemonergy Studio.
- Use the block reference for settings and connections.
- Implementation tested locally; public release pending.

Shapes and element types are explicit. Values must be finite; automatic reshaping and unit conversion are not performed.

This software operation and its numerical conventions are defined by the public contract and worked example; no external research result is claimed.

This reference follows the public interface and locally verified numerical checks for an upcoming release.

Contract: Lemonergy Studio public contract · Verification record: verification-2026-10-27