lemonergy· battery engineering courses

Lemonergy · Studio block

Dynamic interval test

Tests whether values lie between two connected bounds.

Implementation ID
native-dynamic-interval
Reviewed
2026-10-27

Behavior

y = (connected lower ≤ u ≤ connected upper). The worked example connects this operation to signals in Lemonergy Studio.

Interface

Dynamic interval test interfaceInputs or arguments on the left, observed outputs on the right. Conserving terminals appear below the component. The tables give units and behavior.Dynamic interval testStudio blockin0in1in2out0
Original Lemonergy interface view. Lines identify ports; they are not a completed simulation circuit.
Ports and observed outputs
NameDirectionUnitMeaning
in0input1Value; real scalar.
in1input1Lower; real scalar.
in2input1Upper; real scalar.
out0output1Inside; bool scalar.

Parameters

Defaults are initial model values. Select values for your own model and operating conditions.

Configuration fields
ParameterUnitDefaultMeaning and limits
Include lower
params[0]		11Configured finite numerical parameter.
Include upper
params[1]		11Configured finite numerical parameter.

Equations and rules

  • y = (connected lower ≤ u ≤ connected upper)

Worked example

Dynamic interval test — worked example

Value = 3; Lower = 2; Upper = 4. Inside at 0 s = 1.

Open Studio example after release →
Numerical checks for the bundled synthetic example
OutputTime (s)Expected valueUnitAbsolute tolerance
Inside
out0		0111e-08

Explore the recorded outputs

Dynamic interval test recorded example

Dynamic interval test
Dynamic interval test against timeRecorded synthetic simulation values. Time in seconds; output in —.0.500.750.2510.51.250.751.51—Time (s)
Dynamic interval test: 1 — at 0 s

2 actual recorded samples. Lines are visual guides between samples. Synthetic example, not measured cell data.

Download the recorded samples (JSON) · Open this Studio example after release

Use in a workflow

Dynamic interval test — worked example

Tests whether values lie between two connected bounds.

  1. Dynamic interval test: y = (connected lower ≤ u ≤ connected upper). The worked example connects this operation to signals in Lemonergy Studio.
    • Use the block reference for settings and connections.
    • Implementation tested locally; public release pending.
Open Studio example after release

Connected concepts

Limits and interpretation

  • Shapes and element types are explicit. Values must be finite; automatic reshaping and unit conversion are not performed.

Reference basis

This software operation and its numerical conventions are defined by the public contract and worked example; no external research result is claimed.

Implementation sources

This reference follows the public interface and locally verified numerical checks for an upcoming release.

Contract: Lemonergy Studio public contract · Verification record: verification-2026-10-27

  • docs/glossary/native-block-verification.json

This implementation and its workflow uses (JSON) · Knowledge graph (JSON-LD)