lemonergy· battery engineering courses

Lemonergy · Studio block

Input resolution check

Checks distance to the nearest quantization grid point with an explicit absolute tolerance.

Implementation ID
native-check-resolution
Reviewed
2026-10-27

Behavior

pass = (|value − spacing × round(value/spacing)| ≤ tolerance).

Interface

Input resolution check interfaceInputs or arguments on the left, observed outputs on the right. Conserving terminals appear below the component. The tables give units and behavior.Input resolution checkStudio blockin0out0
Original Lemonergy interface view. Lines identify ports; they are not a completed simulation circuit.
Ports and observed outputs
NameDirectionUnitMeaning
in0input1Value; real scalar.
out0output1On grid; bool scalar.

Parameters

Defaults are initial model values. Select values for your own model and operating conditions.

Configuration fields
ParameterUnitDefaultMeaning and limits
Grid spacing
params[0]		10.25Configured value for Grid spacing.
Absolute tolerance
params[1]		11e-09Configured value for Absolute tolerance.

Equations and rules

  • pass = (|value − spacing × round(value/spacing)| ≤ tolerance)

Worked example

Input resolution check — worked example

Value = 1.5. On grid at 0 s = 1.

Open Studio example after release →
Numerical checks for the bundled synthetic example
OutputTime (s)Expected valueUnitAbsolute tolerance
On grid
out0		0111e-09

Explore the recorded outputs

Input resolution check recorded example

Input resolution check
Input resolution check against timeRecorded synthetic simulation values. Time in seconds; output in —.0.500.750.2510.51.250.751.51—Time (s)
Input resolution check: 1 — at 0 s

2 actual recorded samples. Lines are visual guides between samples. Synthetic example, not measured cell data.

Download the recorded samples (JSON) · Open this Studio example after release

Use in a workflow

Input resolution check — worked example

Checks distance to the nearest quantization grid point with an explicit absolute tolerance.

  1. Input resolution check: pass = (|value − spacing × round(value/spacing)| ≤ tolerance).
    • Use the block reference for settings and connections.
    • Implementation tested locally; public release pending.
Open Studio example after release

Connected concepts

Limits and interpretation

  • Positive grid spacing and absolute tolerance smaller than half the spacing are required.

Reference basis

This software operation is defined by its public contract and worked example; no external research result is claimed.

Implementation sources

This reference follows the public interface and locally verified numerical checks for an upcoming release.

Contract: Lemonergy Studio public contract · Verification record: verification-2026-10-27

  • docs/glossary/native-block-verification.json

This implementation and its workflow uses (JSON) · Knowledge graph (JSON-LD)