lemonergy· battery engineering courses

Lemonergy · Studio block

Static range check

Reports whether a scalar lies inside inclusive configured bounds.

Implementation ID
native-check-range
Reviewed
2026-10-27

Behavior

pass = (lower ≤ value ≤ upper).

Interface

Static range check interfaceInputs or arguments on the left, observed outputs on the right. Conserving terminals appear below the component. The tables give units and behavior.Static range checkStudio blockin0out0
Original Lemonergy interface view. Lines identify ports; they are not a completed simulation circuit.
Ports and observed outputs
NameDirectionUnitMeaning
in0input1Value; real scalar.
out0output1Within bounds; bool scalar.

Parameters

Defaults are initial model values. Select values for your own model and operating conditions.

Configuration fields
ParameterUnitDefaultMeaning and limits
Lower bound
params[0]		10Configured value for Lower bound.
Upper bound
params[1]		110Configured value for Upper bound.

Equations and rules

  • pass = (lower ≤ value ≤ upper)

Worked example

Static range check — worked example

Value = 7. Within bounds at 0 s = 1.

Open Studio example after release →
Numerical checks for the bundled synthetic example
OutputTime (s)Expected valueUnitAbsolute tolerance
Within bounds
out0		0111e-09

Explore the recorded outputs

Static range check recorded example

Static range check
Static range check against timeRecorded synthetic simulation values. Time in seconds; output in —.0.500.750.2510.51.250.751.51—Time (s)
Static range check: 1 — at 0 s

2 actual recorded samples. Lines are visual guides between samples. Synthetic example, not measured cell data.

Download the recorded samples (JSON) · Open this Studio example after release

Use in a workflow

Static range check — worked example

Reports whether a scalar lies inside inclusive configured bounds.

  1. Static range check: pass = (lower ≤ value ≤ upper).
    • Use the block reference for settings and connections.
    • Implementation tested locally; public release pending.
Open Studio example after release

Connected concepts

Limits and interpretation

  • Scalar real input and inclusive configured bounds.

Reference basis

This software operation is defined by its public contract and worked example; no external research result is claimed.

Implementation sources

This reference follows the public interface and locally verified numerical checks for an upcoming release.

Contract: Lemonergy Studio public contract · Verification record: verification-2026-10-27

  • docs/glossary/native-block-verification.json

This implementation and its workflow uses (JSON) · Knowledge graph (JSON-LD)