lemonergy· battery engineering courses

Lemonergy · Studio block

Signal gap check

Reports whether the absolute difference between two inputs is within a configured tolerance.

Implementation ID
native-check-gap
Reviewed
2026-10-27

Behavior

pass = (|first − second| ≤ tolerance).

Interface

Signal gap check interfaceInputs or arguments on the left, observed outputs on the right. Conserving terminals appear below the component. The tables give units and behavior.Signal gap checkStudio blockin0in1out0
Original Lemonergy interface view. Lines identify ports; they are not a completed simulation circuit.
Ports and observed outputs
NameDirectionUnitMeaning
in0input1First value; real scalar.
in1input1Second value; real scalar.
out0output1Pass; bool scalar.

Parameters

Defaults are initial model values. Select values for your own model and operating conditions.

Configuration fields
ParameterUnitDefaultMeaning and limits
Maximum absolute difference
params[0]		10.5Configured value for Maximum absolute difference.

Equations and rules

  • pass = (|first − second| ≤ tolerance)

Worked example

Signal gap check — worked example

First value = 2; Second value = 2.4. Pass at 0 s = 1.

Open Studio example after release →
Numerical checks for the bundled synthetic example
OutputTime (s)Expected valueUnitAbsolute tolerance
Pass
out0		0111e-09

Explore the recorded outputs

Signal gap check recorded example

Signal gap check
Signal gap check against timeRecorded synthetic simulation values. Time in seconds; output in —.0.500.750.2510.51.250.751.51—Time (s)
Signal gap check: 1 — at 0 s

2 actual recorded samples. Lines are visual guides between samples. Synthetic example, not measured cell data.

Download the recorded samples (JSON) · Open this Studio example after release

Use in a workflow

Signal gap check — worked example

Reports whether the absolute difference between two inputs is within a configured tolerance.

  1. Signal gap check: pass = (|first − second| ≤ tolerance).
    • Use the block reference for settings and connections.
    • Implementation tested locally; public release pending.
Open Studio example after release

Connected concepts

Limits and interpretation

  • Scalar real inputs with equal quantities; this is an absolute difference check.

Reference basis

This software operation is defined by its public contract and worked example; no external research result is claimed.

Implementation sources

This reference follows the public interface and locally verified numerical checks for an upcoming release.

Contract: Lemonergy Studio public contract · Verification record: verification-2026-10-27

  • docs/glossary/native-block-verification.json

This implementation and its workflow uses (JSON) · Knowledge graph (JSON-LD)