lemonergy· battery engineering courses

Lemonergy · Studio block

Dynamic range check

Reports whether a scalar lies between two input bounds. Reversed bounds are invalid.

Implementation ID
native-check-dynamic-range
Reviewed
2026-10-27

Behavior

pass = (connected lower ≤ value ≤ connected upper).

Interface

Dynamic range check interfaceInputs or arguments on the left, observed outputs on the right. Conserving terminals appear below the component. The tables give units and behavior.Dynamic range checkStudio blockin0in1in2out0
Original Lemonergy interface view. Lines identify ports; they are not a completed simulation circuit.
Ports and observed outputs
NameDirectionUnitMeaning
in0input1Value; real scalar.
in1input1Lower bound; real scalar.
in2input1Upper bound; real scalar.
out0output1Within bounds; bool scalar.

Parameters

No configurable parameters for this component.

Equations and rules

  • pass = (connected lower ≤ value ≤ connected upper)

Worked example

Dynamic range check — worked example

Value = 7; Lower bound = 0; Upper bound = 10. Within bounds at 0 s = 1.

Open Studio example after release →
Numerical checks for the bundled synthetic example
OutputTime (s)Expected valueUnitAbsolute tolerance
Within bounds
out0		0111e-09

Explore the recorded outputs

Dynamic range check recorded example

Dynamic range check
Dynamic range check against timeRecorded synthetic simulation values. Time in seconds; output in —.0.500.750.2510.51.250.751.51—Time (s)
Dynamic range check: 1 — at 0 s

2 actual recorded samples. Lines are visual guides between samples. Synthetic example, not measured cell data.

Download the recorded samples (JSON) · Open this Studio example after release

Use in a workflow

Dynamic range check — worked example

Reports whether a scalar lies between two input bounds. Reversed bounds are invalid.

  1. Dynamic range check: pass = (connected lower ≤ value ≤ connected upper).
    • Use the block reference for settings and connections.
    • Implementation tested locally; public release pending.
Open Studio example after release

Connected concepts

Limits and interpretation

  • Scalar real inputs with identical quantities; reversed bounds stop the run.

Reference basis

This software operation is defined by its public contract and worked example; no external research result is claimed.

Implementation sources

This reference follows the public interface and locally verified numerical checks for an upcoming release.

Contract: Lemonergy Studio public contract · Verification record: verification-2026-10-27

  • docs/glossary/native-block-verification.json

This implementation and its workflow uses (JSON) · Knowledge graph (JSON-LD)