lemonergy· battery engineering courses

Lemonergy · Studio block

Array element submodel

Applies a configured stateless operation independently to each array element.

Implementation ID
native-array-map
Reviewed
2026-10-27

Behavior

yᵢ = nested_kernel(uᵢ). The worked example connects this operation to signals in Lemonergy Studio.

Interface

Array element submodel interfaceInputs or arguments on the left, observed outputs on the right. Conserving terminals appear below the component. The tables give units and behavior.Array element submodelStudio blockin0out0
Original Lemonergy interface view. Lines identify ports; they are not a completed simulation circuit.
Ports and observed outputs
NameDirectionUnitMeaning
in0input1Array; real 3 array.
out0output1Mapped array; real 3 array.

Parameters

Defaults are initial model values. Select values for your own model and operating conditions.

Configuration fields
ParameterUnitDefaultMeaning and limits
Nested operation
nested		1native-biasA configured pure stateless one-input, one-output Lemonergy operation. Edit its own parameters inside the wrapper.

Equations and rules

  • yᵢ = nested_kernel(uᵢ)

Worked example

Array element submodel — worked example

Array = [1,2,3]. Mapped array at 0 s = [3,4,5].

Open Studio example after release →
Numerical checks for the bundled synthetic example
OutputTime (s)Expected valueUnitAbsolute tolerance
Mapped array
out0		0[3, 4, 5]11e-08

Explore the recorded outputs

Array element submodel recorded example

Array element submodel [1]
Array element submodel [1] against timeRecorded synthetic simulation values. Time in seconds; output in —.2.502.750.2530.53.250.753.51—Time (s)
Array element submodel [1]: 3 — at 0 s

2 actual recorded samples. Lines are visual guides between samples. Synthetic example, not measured cell data.

Download the recorded samples (JSON) · Open this Studio example after release

Use in a workflow

Array element submodel — worked example

Applies a configured stateless operation independently to each array element.

  1. Array element submodel: yᵢ = nested_kernel(uᵢ). The worked example connects this operation to signals in Lemonergy Studio.
    • Use the block reference for settings and connections.
    • Implementation tested locally; public release pending.
Open Studio example after release

Connected concepts

Limits and interpretation

  • One pure stateless nested kernel per element. Arbitrary multi-block nested graphs, per-element state and implicit residual kernels are explicitly refused.
  • Shapes and element types are explicit. Values must be finite; automatic reshaping and unit conversion are not performed.
  • Only one pure stateless nested kernel is executed. Arbitrary multi-block or stateful nested graphs are not supported.

Reference basis

This software operation and its numerical conventions are defined by the public contract and worked example; no external research result is claimed.

Implementation sources

This reference follows the public interface and locally verified numerical checks for an upcoming release.

Contract: Lemonergy Studio public contract · Verification record: verification-2026-10-27

  • docs/glossary/native-block-verification.json

This implementation and its workflow uses (JSON) · Knowledge graph (JSON-LD)