Lemonergy · Studio block

Bus selector

Selects one declared field or nested field from a named bus.

Behavior

A dotted field path selects the original typed value; missing fields are rejected before simulation.

Original Lemonergy interface view. Lines identify ports; they are not a completed simulation circuit.

Ports and observed outputs
Name	Direction	Unit	Meaning
`bus`	input	1	pack; named bus with declared typed fields.
`soc`	output	fraction	soc; real signal.

Defaults are initial model values. Select values for your own model and operating conditions.

Configuration fields
Parameter	Unit	Default	Meaning and limits
Bus declaration `bus`	1	pack	Explicit bus used by this worked model.
Selected field path `field`	1	state.soc	Explicit field used by this worked model.

Initial-SOC = 0.5; Updated-SOC = 0.6; Cell-voltage = 3.7. Before at 1 s = 0.5; After at 1 s = 0.6.

Numerical checks for the bundled synthetic example
Output	Time (s)	Expected value	Unit	Absolute tolerance
Before `Before`	1	`0.5`	fraction	1e-09
After `After`	1	`0.6`	fraction	1e-09

Selects one declared field or nested field from a named bus.

Bus selector: A dotted field path selects the original typed value; missing fields are rejected before simulation.
- Use the block reference for settings and connections.
- Implementation tested locally; public release pending.

Paths must exist in the declared bus version; dynamic field names are not supported.

This software operation is defined by its public contract and worked example; no external research result is claimed.

This reference follows the public interface and locally verified numerical checks for an upcoming release.

Contract: Lemonergy Studio public contract · Verification record: verification-2026-10-27