Battery knowledge · Modules, packs and battery management
Heat-shrink sleeve
A tube of PVC or PET film that shrinks tight when heated, used both as the printed jacket on each cylindrical cell and as the outer wrap of small packs. On a cell it insulates the can, which is at negative potential, so a torn wrapper beside a positive terminal or nickel strip is a classic short-circuit path.
- Also called
- shrink wrap, heat shrink, PVC wrap, cell wrapper, cell sleeve
Example
Modules, packs and battery management: an example situation
Twelve 3.6 V, 5 Ah cells in 6s2p give 21.6 V, 10 Ah and 216 Wh nominally before other restrictions.
Read Heat-shrink sleeve alongside Cylindrical cell in this context. A cell made by winding the electrodes into a jelly roll and sealing it in a round metal can. Sizes are named by their dimensions: a 21700 cell is 21 mm across and 70 mm long.
Use in Lemonergy
Make series/parallel architecture explicit.
This is a reference concept. No executable Lemonergy block has been verified for this term.
References & further reading
Further reading on this topic
These sources provide broader context; they are not presented as citations for every statement in this entry.
- Extended Kalman filtering for battery management systems of LiPB-based HEV battery packs: Part 2. Modeling and identification
Gregory L. Plett · Journal of Power Sources · 2004
Topic background · Battery charge balance, open-circuit voltage, ohmic loss, polarization dynamics and model identification; parameters require cell-specific data.
- Getting Started with the BQ76925
Texas Instruments · 2019
Topic background · A concrete BMS analog front-end example: cell voltage, current, temperature measurement and MCU integration.