lemonergy· battery engineering courses

Lemonergy · Studio block

Temperature sensor

Nonloading absolute temperature at a and temperature difference a minus b

Implementation ID
thermal-temperature-sensor
Reviewed
2026-10-27

Behavior

Conserving component solved simultaneously with the connected network. Nonloading absolute temperature at a and temperature difference a minus b

Interface

Temperature sensor interfaceInputs or arguments on the left, observed outputs on the right. Conserving terminals appear below the component. The tables give units and behavior.Temperature sensorStudio blocktemperaturetemperatureDifferenceab
Original Lemonergy interface view. Lines identify ports; they are not a completed simulation circuit.
Ports and observed outputs
NameDirectionUnitMeaning
aterminalK; Wthermal conserving connection; absolute temperature with balanced heat flow.
bterminalK; Wthermal conserving connection; absolute temperature with balanced heat flow.
temperatureoutputKRecorded temperature measurement from the conserving simulation.
temperatureDifferenceoutputKRecorded temperatureDifference measurement from the conserving simulation.

Parameters

No configurable parameters for this component.

Equations and rules

  • Tmeasured = Ta
  • ΔTmeasured = Ta − Tb
  • Q̇ = 0

Worked example

Temperature sensor worked example

Editable first-party network. hot-boundary: differenceK=320; cold-boundary: differenceK=300. Checks below were verified in the native execution engine.

Open Studio example after release →
Numerical checks for the bundled synthetic example
OutputTime (s)Expected valueUnitAbsolute tolerance
temperature
target/temperature		1320K0.00031999999999999997
temperatureDifference
target/temperatureDifference		120K1.9999999999999998e-05

Use in a workflow

Temperature sensor worked example

Nonloading absolute temperature at a and temperature difference a minus b

  1. Temperature sensor: Conserving component solved simultaneously with the connected network. Nonloading absolute temperature at a and temperature difference a minus b
    • Use the block reference for settings and connections.
    • Implementation tested locally; public release pending.
Open Studio example after release

Connected concepts

Limits and interpretation

  • Nonloading absolute temperature at a and temperature difference a minus b
  • Demonstration parameters are not calibrated hardware data. Singular or incompatible ideal constraints and unsupported state ranges stop the run.

Scientific and mathematical references

These sources explain the scientific and mathematical background. The behavior, interface and limits above define the Lemonergy implementation; a citation does not imply every model option in the source is implemented.

  1. University Physics Volume 2, §1.6: Mechanisms of Heat Transfer

    OpenStax, Rice University

    Technical reference · Conduction, convection, radiation and thermal resistance.

  2. Enthalpy

    NASA Glenn Research Center

    Technical reference · Underlying physical law or reduced-model basis; Lemonergy implementation choices and limits are documented separately.

Implementation sources

This reference follows the public interface and locally verified numerical checks for an upcoming release.

Contract: Lemonergy Studio public contract · Verification record: verification-2026-10-27

  • docs/glossary/native-block-verification.json

This implementation and its workflow uses (JSON) · Knowledge graph (JSON-LD)