Tesla Roadster 2.0 — 3D visual asset
Original creator: Michael (@gmmichaelonearth)
Creator: https://sketchfab.com/gmmichaelonearth
Source: https://sketchfab.com/3d-models/tesla-roadster-20-8d5da3904e434fc3830edf558cb9014d
License: Creative Commons Attribution 4.0 International (CC BY 4.0)
https://creativecommons.org/licenses/by/4.0/
Legal code: https://creativecommons.org/licenses/by/4.0/legalcode.en
The source Sketchfab page displayed CC Attribution with this license link when checked on 20 October 2026. The supplied archive contained no separate license notice.

Lemonergy modifications, 20 October 2026:
Converted OBJ to glTF/GLB; removed constant texture maps in favor of material factors; compressed retained color maps; added artist-directed paint, glazing and trim finishes; repaired rear-plate winding/normals; replaced the plate artwork with the official Lemonergy logo and name at the project owner's request; normalized axes and uniformly set the illustrative length to 4.55 m; Draco-compressed both files; simplified the web version to 174,930 triangles. Full-detail version retains 971,830 source triangles. Preview images are rendered from the adapted model.

Interactive runtime modifications, 20 October 2026:
Cut the four existing rim and spoke discs from the fused exterior mesh at load time, about hub axes surveyed from the asset, preserving source texture coordinates and interpolating the cut boundaries. The artist drew each tyre as an oval and modelled only the visible lower half of its tread, so those tyres (including their squashed ground contact) are removed and replaced by generated round low-profile tyres, dark arch liners and wheel-well backdrops. The rims keep the artist's texture under a graphite tint. Wheel roll follows native travel distance and front steering follows the native steering actuator within a visual limit. This is visual articulation, not individual-wheel dynamics or measured Tesla geometry. Strengthened the rear plate with a larger, high-contrast official Lemonergy mark and name; added a matching rear-fascia wordmark for readable branding in the driving view. The downloaded GLB remains unchanged.

Web delivery and display modifications, 20 October 2026:
Re-encoded the exterior colour atlas (2048 x 2048) and the original plate image as WebP inside the GLB, reducing it from 1,539,420 to 1,077,784 bytes; geometry, texture coordinates and the finish and clearcoat maps are unchanged. At runtime the artist's raised plate characters, which sit behind the opaque Lemonergy plate and cannot be seen, are not drawn. In cinematic lighting the car reflects a generated outdoor sky, skyline and ground, and a soft contact shade is drawn on the road beneath it. These are display changes only.

Attribution example:
“Tesla Roadster 2.0” by Michael (@gmmichaelonearth), Sketchfab, CC BY 4.0; modified by Lemonergy. Include the source and license links above.

The model and derived preview images retain CC BY 4.0. Lemonergy simulation code is separately licensed; its license does not replace this asset license. The car is an artist's visual reference model, not factory CAD or validated vehicle dimensions. Appearance does not validate the engineering assumptions. No endorsement by Tesla or the original artist is implied. Trademark and other rights are not granted by CC BY 4.0.