{
  "node": {
    "id": "term:laser-cutting",
    "type": "Term",
    "label": "Laser cutting",
    "properties": {
      "id": "laser-cutting",
      "name": "Laser cutting",
      "section": "topic-manufacturing",
      "definition": "Cutting electrodes with a pulsed laser instead of a die, used for notching and for separating sheets. It changes shape without a new tool, at the cost of a heat-affected zone that must be kept small.",
      "related": [
        "notching",
        "slitting"
      ],
      "url": "https://lemonergy.com/learn/glossary/laser-cutting/",
      "mentions": []
    }
  },
  "edges": [
    {
      "id": "edge:2350",
      "source": "term:laser-cutting",
      "target": "topic:topic-manufacturing",
      "type": "belongsTo",
      "properties": {
        "sourceFile": "terms.json"
      }
    },
    {
      "id": "edge:2351",
      "source": "term:laser-cutting",
      "target": "term:notching",
      "type": "relatedTo",
      "properties": {
        "sourceFile": "terms.json",
        "meaning": "Related context; not a causal claim"
      }
    },
    {
      "id": "edge:2352",
      "source": "term:laser-cutting",
      "target": "term:slitting",
      "type": "relatedTo",
      "properties": {
        "sourceFile": "terms.json",
        "meaning": "Related context; not a causal claim"
      }
    }
  ],
  "neighbors": [
    {
      "id": "topic:topic-manufacturing",
      "type": "Topic",
      "label": "Manufacturing",
      "properties": {
        "id": "topic-manufacturing",
        "name": "Manufacturing",
        "lede": "The steps that turn powders and foils into a finished cell, in production order.",
        "context": "Place operations and quality checks in process order.",
        "example": "An electrode can meet coating mass targets but fail adhesion or moisture checks later.",
        "lesson_url": "https://lemonergy.com/learn/fundamentals/cell-production/",
        "lesson_label": "Open production"
      }
    },
    {
      "id": "term:notching",
      "type": "Term",
      "label": "Notching",
      "properties": {
        "id": "notching",
        "name": "Notching",
        "section": "topic-manufacturing",
        "definition": "Cutting the tab shape and the electrode sheet outline from the slit strip, mechanically or by laser, before stacking. Laser notching has no tool wear but must avoid heat damage at the edge.",
        "related": [
          "slitting",
          "stacking",
          "tab",
          "laser-cutting"
        ],
        "lesson": "fundamentals/cell-production/#assembly",
        "url": "https://lemonergy.com/learn/glossary/notching/",
        "mentions": [
          "electrode"
        ]
      }
    },
    {
      "id": "term:slitting",
      "type": "Term",
      "label": "Slitting",
      "properties": {
        "id": "slitting",
        "name": "Slitting",
        "section": "topic-manufacturing",
        "definition": "Cutting the wide coated roll into the narrow strips a cell needs, with rotary knives. A clean edge matters: burrs can pierce the separator and cause an internal short.",
        "related": [
          "notching",
          "internal-short-circuit",
          "calendering"
        ],
        "lesson": "fundamentals/cell-production/#electrodes",
        "example": {
          "title": "Check width and edges",
          "text": "Cutting a coated roll to width creates new edges. Width accuracy and edge quality are separate checks."
        },
        "url": "https://lemonergy.com/learn/glossary/slitting/",
        "mentions": [
          "separator",
          "burr"
        ]
      }
    }
  ]
}