{
  "node": {
    "id": "term:iec-60730",
    "type": "Term",
    "label": "IEC 60730",
    "properties": {
      "id": "iec-60730",
      "name": "IEC 60730",
      "aka": [
        "IEC 60730-1",
        "software class B"
      ],
      "section": "topic-standards-stationary",
      "definition": "The IEC series on automatic electrical controls for household and similar use, whose part 1 covers the safety and functional safety of control electronics. It sorts safety software into classes: B guards against hazards from hardware faults, C must prevent hazards without other protective devices. Battery-management firmware can be assessed to these classes or the equivalent UL 1998, as when a BMS is recognised for UL 1973.",
      "related": [
        "functional-safety",
        "bms",
        "firmware",
        "mcu",
        "ul-1973"
      ],
      "url": "https://lemonergy.com/learn/glossary/iec-60730/",
      "mentions": []
    }
  },
  "edges": [
    {
      "id": "edge:6370",
      "source": "term:iec-60730",
      "target": "topic:topic-standards-stationary",
      "type": "belongsTo",
      "properties": {
        "sourceFile": "terms.json"
      }
    },
    {
      "id": "edge:6371",
      "source": "term:iec-60730",
      "target": "term:functional-safety",
      "type": "relatedTo",
      "properties": {
        "sourceFile": "terms.json",
        "meaning": "Related context; not a causal claim"
      }
    },
    {
      "id": "edge:6372",
      "source": "term:iec-60730",
      "target": "term:bms",
      "type": "relatedTo",
      "properties": {
        "sourceFile": "terms.json",
        "meaning": "Related context; not a causal claim"
      }
    },
    {
      "id": "edge:6373",
      "source": "term:iec-60730",
      "target": "term:firmware",
      "type": "relatedTo",
      "properties": {
        "sourceFile": "terms.json",
        "meaning": "Related context; not a causal claim"
      }
    },
    {
      "id": "edge:6374",
      "source": "term:iec-60730",
      "target": "term:mcu",
      "type": "relatedTo",
      "properties": {
        "sourceFile": "terms.json",
        "meaning": "Related context; not a causal claim"
      }
    },
    {
      "id": "edge:6375",
      "source": "term:iec-60730",
      "target": "term:ul-1973",
      "type": "relatedTo",
      "properties": {
        "sourceFile": "terms.json",
        "meaning": "Related context; not a causal claim"
      }
    }
  ],
  "neighbors": [
    {
      "id": "topic:topic-standards-stationary",
      "type": "Topic",
      "label": "Stationary, industrial and product standards",
      "properties": {
        "id": "topic-standards-stationary",
        "name": "Stationary, industrial and product standards",
        "lede": "Safety and performance standards for portable, industrial and grid batteries, their electronics and their installation.",
        "context": "Match scope to product and installation.",
        "example": "A cell-level test does not establish fire performance or commissioning requirements for a complete installation.",
        "lesson_url": "https://lemonergy.com/learn/fundamentals/battery-basics/",
        "lesson_label": "Open battery basics"
      }
    },
    {
      "id": "term:functional-safety",
      "type": "Term",
      "label": "Functional safety",
      "properties": {
        "id": "functional-safety",
        "name": "Functional safety",
        "abbr": "ISO 26262",
        "aka": [
          "ASIL"
        ],
        "section": "topic-hvsafety",
        "definition": "The discipline, standardised for vehicles in ISO 26262, of making sure electronic failures do not cause harm. Battery functions such as overvoltage protection are classified by risk into ASIL levels A to D, which set how redundant and verified their hardware and software must be.",
        "related": [
          "bms",
          "high-voltage-interlock",
          "insulation-resistance",
          "fmea",
          "mcu",
          "iso-13849"
        ],
        "url": "https://lemonergy.com/learn/glossary/functional-safety/",
        "mentions": []
      }
    },
    {
      "id": "term:bms",
      "type": "Term",
      "label": "Battery management system",
      "properties": {
        "id": "bms",
        "name": "Battery management system",
        "abbr": "BMS",
        "section": "topic-pack",
        "definition": "The electronics and software that keep a battery inside its safe window: measuring every cell voltage and many temperatures, estimating SOC and SOH, balancing cells, computing current limits, controlling the contactors and reporting over the vehicle network.",
        "related": [
          "state-of-charge",
          "cell-balancing",
          "state-of-power",
          "cell-supervision-circuit",
          "contactor",
          "can-bus"
        ],
        "lesson": "fundamentals/battery-basics/#cell-module-pack",
        "url": "https://lemonergy.com/learn/glossary/bms/",
        "mentions": [
          "state-of-health",
          "cell-voltage"
        ]
      }
    },
    {
      "id": "term:firmware",
      "type": "Term",
      "label": "Firmware",
      "properties": {
        "id": "firmware",
        "name": "Firmware",
        "aka": [
          "embedded software",
          "BMS software"
        ],
        "section": "topic-data",
        "definition": "The software that runs on a BMS or charger controller. Its version decides how SOC, limits and faults behave, so it is tracked like a part number, updated by flashing over CAN or over the air, and recorded in the battery passport.",
        "related": [
          "mcu",
          "flashing",
          "bmu",
          "battery-passport",
          "functional-safety"
        ],
        "url": "https://lemonergy.com/learn/glossary/firmware/",
        "mentions": [
          "charger",
          "state-of-charge",
          "bms",
          "over-the-air-update"
        ]
      }
    },
    {
      "id": "term:mcu",
      "type": "Term",
      "label": "Microcontroller",
      "properties": {
        "id": "mcu",
        "name": "Microcontroller",
        "abbr": "MCU",
        "section": "topic-data",
        "definition": "The processor that runs BMS firmware: state estimation, protection, balancing decisions and communication. Automotive BMS controllers use safety microcontrollers with lockstep cores and hardware self-tests so they can meet ASIL C or D.",
        "related": [
          "bmu",
          "firmware",
          "functional-safety",
          "fpga",
          "afe"
        ],
        "url": "https://lemonergy.com/learn/glossary/mcu/",
        "mentions": [
          "bms",
          "lockstep-core"
        ]
      }
    },
    {
      "id": "term:ul-1973",
      "type": "Term",
      "label": "UL 1973",
      "properties": {
        "id": "ul-1973",
        "name": "UL 1973",
        "section": "topic-standards-stationary",
        "definition": "The North American safety standard for batteries in stationary storage, vehicle auxiliary power and light electric rail, covering cells, modules and the battery system with its management electronics. It centres on functional safety analysis of hardware and software alongside abuse tests, and a UL 1973 battery is what UL 9540 expects inside a complete energy storage system.",
        "related": [
          "ul-9540",
          "ul-9540a",
          "iec-62619",
          "stationary-storage",
          "bms",
          "ul-1741"
        ],
        "url": "https://lemonergy.com/learn/glossary/ul-1973/",
        "mentions": [
          "functional-safety"
        ]
      }
    }
  ]
}