{
  "node": {
    "id": "term:equalization-charge",
    "type": "Term",
    "label": "Equalization charge",
    "properties": {
      "id": "equalization-charge",
      "name": "Equalization charge",
      "section": "topic-charging",
      "definition": "A deliberate, controlled overcharge of a lead–acid battery that brings weaker cells up to full and stirs the electrolyte. It must never be applied to lithium-ion cells, which are equalised electronically by the BMS instead.",
      "related": [
        "lead-acid",
        "cell-balancing",
        "overcharge",
        "trickle-charge"
      ],
      "url": "https://lemonergy.com/learn/glossary/equalization-charge/",
      "mentions": [
        "electrolyte",
        "bms"
      ]
    }
  },
  "edges": [
    {
      "id": "edge:3574",
      "source": "term:equalization-charge",
      "target": "topic:topic-charging",
      "type": "belongsTo",
      "properties": {
        "sourceFile": "terms.json"
      }
    },
    {
      "id": "edge:3575",
      "source": "term:equalization-charge",
      "target": "term:lead-acid",
      "type": "relatedTo",
      "properties": {
        "sourceFile": "terms.json",
        "meaning": "Related context; not a causal claim"
      }
    },
    {
      "id": "edge:3576",
      "source": "term:equalization-charge",
      "target": "term:cell-balancing",
      "type": "relatedTo",
      "properties": {
        "sourceFile": "terms.json",
        "meaning": "Related context; not a causal claim"
      }
    },
    {
      "id": "edge:3577",
      "source": "term:equalization-charge",
      "target": "term:overcharge",
      "type": "relatedTo",
      "properties": {
        "sourceFile": "terms.json",
        "meaning": "Related context; not a causal claim"
      }
    },
    {
      "id": "edge:3578",
      "source": "term:equalization-charge",
      "target": "term:trickle-charge",
      "type": "relatedTo",
      "properties": {
        "sourceFile": "terms.json",
        "meaning": "Related context; not a causal claim"
      }
    },
    {
      "id": "edge:mentions/equalization-charge/electrolyte",
      "source": "term:equalization-charge",
      "target": "term:electrolyte",
      "type": "mentions",
      "properties": {
        "sourceFile": "terms.json",
        "method": "build_glossary.mention_index + mentions",
        "field": "definition",
        "meaning": "Text mention; not a causal claim"
      }
    },
    {
      "id": "edge:mentions/equalization-charge/bms",
      "source": "term:equalization-charge",
      "target": "term:bms",
      "type": "mentions",
      "properties": {
        "sourceFile": "terms.json",
        "method": "build_glossary.mention_index + mentions",
        "field": "definition",
        "meaning": "Text mention; not a causal claim"
      }
    }
  ],
  "neighbors": [
    {
      "id": "topic:topic-charging",
      "type": "Topic",
      "label": "Charging and discharging",
      "properties": {
        "id": "topic-charging",
        "name": "Charging and discharging",
        "lede": "How current goes in and comes out, and the limits that stop it.",
        "context": "Separate regulation from availability.",
        "example": "The same CC–CV law can operate overnight or during a short depot stop.",
        "lesson_url": "https://lemonergy.com/learn/fundamentals/capacity-and-c-rate/",
        "lesson_label": "Open charging quantities"
      }
    },
    {
      "id": "term:lead-acid",
      "type": "Term",
      "label": "Lead–acid battery",
      "properties": {
        "id": "lead-acid",
        "name": "Lead–acid battery",
        "section": "topic-other-chemistries",
        "definition": "The oldest rechargeable chemistry, lead and lead dioxide electrodes in sulfuric acid, at 2 V per cell. Heavy and short-lived in deep cycling but cheap, recyclable and good at cold cranking, it still starts most cars and backs up most telecom sites.",
        "related": [
          "nominal-voltage",
          "recycling",
          "specific-energy"
        ],
        "lesson": "labs/battery-materials-lab/#bml-market",
        "url": "https://lemonergy.com/learn/glossary/lead-acid/",
        "mentions": []
      }
    },
    {
      "id": "term:cell-balancing",
      "type": "Term",
      "label": "Cell balancing",
      "properties": {
        "id": "cell-balancing",
        "name": "Cell balancing",
        "section": "topic-state",
        "definition": "Equalising the state of charge of cells in series, since the pack is limited by its emptiest cell on discharge and its fullest on charge. Passive balancing bleeds charge from high cells through resistors; active balancing moves it between cells.",
        "related": [
          "bms",
          "series-parallel",
          "state-of-charge",
          "cell-to-cell-variation"
        ],
        "example": {
          "title": "Pack average versus cell limits",
          "text": "Average pack SOC can look acceptable while one series cell reaches its voltage limit. One aggregate SOC state does not demonstrate cell balancing."
        },
        "url": "https://lemonergy.com/learn/glossary/cell-balancing/",
        "mentions": [
          "active-balancing"
        ]
      }
    },
    {
      "id": "term:overcharge",
      "type": "Term",
      "label": "Overcharge",
      "properties": {
        "id": "overcharge",
        "name": "Overcharge",
        "section": "topic-charging",
        "definition": "Charging past the upper cutoff voltage. The positive electrode over-delithiates and releases oxygen, the electrolyte oxidises and lithium plates on the negative, so an unprotected overcharge can end in thermal runaway.",
        "related": [
          "cutoff-voltage",
          "thermal-runaway",
          "bms",
          "overcharge-test",
          "electrolyte-decomposition"
        ],
        "url": "https://lemonergy.com/learn/glossary/overcharge/",
        "mentions": [
          "electrode",
          "positive-electrode",
          "electrolyte"
        ]
      }
    },
    {
      "id": "term:trickle-charge",
      "type": "Term",
      "label": "Trickle and float charging",
      "properties": {
        "id": "trickle-charge",
        "name": "Trickle and float charging",
        "section": "topic-charging",
        "definition": "Holding a battery at a small current, or a fixed voltage, to keep it full. It is standard for lead–acid and NiMH but harmful for lithium-ion, which should be left to rest once charged; lithium-ion chargers instead top up when the voltage sags.",
        "related": [
          "lead-acid",
          "overcharge",
          "calendar-aging",
          "slow-charging"
        ],
        "url": "https://lemonergy.com/learn/glossary/trickle-charge/",
        "mentions": [
          "nickel-metal-hydride"
        ]
      }
    },
    {
      "id": "term:electrolyte",
      "type": "Term",
      "label": "Electrolyte",
      "properties": {
        "id": "electrolyte",
        "name": "Electrolyte",
        "section": "topic-electrolytes",
        "definition": "The ion-conducting medium between the electrodes. In a liquid-electrolyte cell it fills the pores of both electrodes and the separator, so it is not a separate structural layer.",
        "related": [
          "lithium-salt",
          "carbonate-solvent",
          "electrolyte-additive",
          "ionic-conductivity",
          "solid-electrolyte",
          "ionic-liquid-electrolyte"
        ],
        "lesson": "fundamentals/cell-architecture/#electrolyte",
        "example": {
          "title": "Ions and electrons",
          "text": "Electrolyte carries ions between electrodes; the external circuit carries electrons. The two paths serve different roles."
        },
        "url": "https://lemonergy.com/learn/glossary/electrolyte/",
        "mentions": [
          "separator"
        ]
      }
    },
    {
      "id": "term:bms",
      "type": "Term",
      "label": "Battery management system",
      "properties": {
        "id": "bms",
        "name": "Battery management system",
        "abbr": "BMS",
        "section": "topic-pack",
        "definition": "The electronics and software that keep a battery inside its safe window: measuring every cell voltage and many temperatures, estimating SOC and SOH, balancing cells, computing current limits, controlling the contactors and reporting over the vehicle network.",
        "related": [
          "state-of-charge",
          "cell-balancing",
          "state-of-power",
          "cell-supervision-circuit",
          "contactor",
          "can-bus"
        ],
        "lesson": "fundamentals/battery-basics/#cell-module-pack",
        "url": "https://lemonergy.com/learn/glossary/bms/",
        "mentions": [
          "state-of-health",
          "cell-voltage"
        ]
      }
    }
  ]
}