{
  "node": {
    "id": "term:cell-design",
    "type": "Term",
    "label": "Cell design",
    "properties": {
      "id": "cell-design",
      "name": "Cell design",
      "section": "topic-manufacturing",
      "definition": "Choosing the chemistry, electrode loadings, porosities, N/P ratio, separator, electrolyte volume and format that together meet an energy, power, life, safety and cost target. Each choice trades against the others: thicker electrodes raise energy and lower power.",
      "related": [
        "np-ratio",
        "areal-loading",
        "porosity",
        "energy-density",
        "specific-power"
      ],
      "url": "https://lemonergy.com/learn/glossary/cell-design/",
      "mentions": [
        "electrode",
        "separator",
        "electrolyte"
      ]
    }
  },
  "edges": [
    {
      "id": "edge:2583",
      "source": "term:cell-design",
      "target": "topic:topic-manufacturing",
      "type": "belongsTo",
      "properties": {
        "sourceFile": "terms.json"
      }
    },
    {
      "id": "edge:2584",
      "source": "term:cell-design",
      "target": "term:np-ratio",
      "type": "relatedTo",
      "properties": {
        "sourceFile": "terms.json",
        "meaning": "Related context; not a causal claim"
      }
    },
    {
      "id": "edge:2585",
      "source": "term:cell-design",
      "target": "term:areal-loading",
      "type": "relatedTo",
      "properties": {
        "sourceFile": "terms.json",
        "meaning": "Related context; not a causal claim"
      }
    },
    {
      "id": "edge:2586",
      "source": "term:cell-design",
      "target": "term:porosity",
      "type": "relatedTo",
      "properties": {
        "sourceFile": "terms.json",
        "meaning": "Related context; not a causal claim"
      }
    },
    {
      "id": "edge:2587",
      "source": "term:cell-design",
      "target": "term:energy-density",
      "type": "relatedTo",
      "properties": {
        "sourceFile": "terms.json",
        "meaning": "Related context; not a causal claim"
      }
    },
    {
      "id": "edge:2588",
      "source": "term:cell-design",
      "target": "term:specific-power",
      "type": "relatedTo",
      "properties": {
        "sourceFile": "terms.json",
        "meaning": "Related context; not a causal claim"
      }
    },
    {
      "id": "edge:mentions/cell-design/electrode",
      "source": "term:cell-design",
      "target": "term:electrode",
      "type": "mentions",
      "properties": {
        "sourceFile": "terms.json",
        "method": "build_glossary.mention_index + mentions",
        "field": "definition",
        "meaning": "Text mention; not a causal claim"
      }
    },
    {
      "id": "edge:mentions/cell-design/separator",
      "source": "term:cell-design",
      "target": "term:separator",
      "type": "mentions",
      "properties": {
        "sourceFile": "terms.json",
        "method": "build_glossary.mention_index + mentions",
        "field": "definition",
        "meaning": "Text mention; not a causal claim"
      }
    },
    {
      "id": "edge:mentions/cell-design/electrolyte",
      "source": "term:cell-design",
      "target": "term:electrolyte",
      "type": "mentions",
      "properties": {
        "sourceFile": "terms.json",
        "method": "build_glossary.mention_index + mentions",
        "field": "definition",
        "meaning": "Text mention; not a causal claim"
      }
    }
  ],
  "neighbors": [
    {
      "id": "topic:topic-manufacturing",
      "type": "Topic",
      "label": "Manufacturing",
      "properties": {
        "id": "topic-manufacturing",
        "name": "Manufacturing",
        "lede": "The steps that turn powders and foils into a finished cell, in production order.",
        "context": "Place operations and quality checks in process order.",
        "example": "An electrode can meet coating mass targets but fail adhesion or moisture checks later.",
        "lesson_url": "https://lemonergy.com/learn/fundamentals/cell-production/",
        "lesson_label": "Open production"
      }
    },
    {
      "id": "term:np-ratio",
      "type": "Term",
      "label": "N/P ratio",
      "properties": {
        "id": "np-ratio",
        "name": "N/P ratio",
        "section": "topic-components",
        "definition": "The areal capacity of the negative electrode divided by that of the positive electrode facing it, usually set at 1.05–1.15. The excess negative capacity ensures there is always a graphite site for every lithium ion on charge, which guards against lithium plating.",
        "formula": "N/P = Q_neg / Q_pos",
        "related": [
          "areal-loading",
          "lithium-plating",
          "cell-design",
          "overhang-alignment",
          "anode-overhang"
        ],
        "example": {
          "title": "Compare electrode capacity budgets",
          "text": "A negative-electrode capacity of 3.3 mAh/cm² paired with a positive-electrode capacity of 3.0 mAh/cm² gives an N/P ratio of 1.10. The chosen capacity definitions and operating windows must match."
        },
        "url": "https://lemonergy.com/learn/glossary/np-ratio/",
        "mentions": [
          "electrode",
          "negative-electrode",
          "positive-electrode",
          "graphite"
        ]
      }
    },
    {
      "id": "term:areal-loading",
      "type": "Term",
      "label": "Areal loading",
      "properties": {
        "id": "areal-loading",
        "name": "Areal loading",
        "aka": [
          "mass loading",
          "areal capacity"
        ],
        "section": "topic-components",
        "definition": "How much active material, or capacity, an electrode carries per square centimetre of foil, typically 2–5 mAh/cm². Higher loading raises energy density but lengthens the ion path, which limits fast charging.",
        "unit": "mAh/cm², mg/cm²",
        "related": [
          "coating",
          "energy-density",
          "fast-charging",
          "tortuosity"
        ],
        "example": {
          "title": "Convert mass and area",
          "text": "200 mg active material over 20 cm² gives 10 mg/cm² loading. State whether the measurement includes one or both coated sides."
        },
        "url": "https://lemonergy.com/learn/glossary/areal-loading/",
        "mentions": [
          "milliampere-hour",
          "electrode",
          "active-material"
        ]
      }
    },
    {
      "id": "term:porosity",
      "type": "Term",
      "label": "Porosity",
      "properties": {
        "id": "porosity",
        "name": "Porosity",
        "abbr": "ε",
        "section": "topic-components",
        "definition": "The fraction of a layer’s volume that is empty space. In a lithium-ion electrode the pores — roughly 20–35 % of the volume after calendering — are filled with electrolyte, which carries ions to the particles.",
        "unit": "—",
        "related": [
          "porous-electrode",
          "tortuosity",
          "calendering",
          "bruggeman-relation"
        ],
        "lesson": "fundamentals/cell-architecture/#porosity",
        "example": {
          "title": "Use the volume basis",
          "text": "Pore volume of 0.3 cm³ within 1 cm³ total electrode volume means 30% porosity. It does not specify connectivity or tortuosity."
        },
        "url": "https://lemonergy.com/learn/glossary/porosity/",
        "mentions": [
          "electrode",
          "electrolyte"
        ]
      }
    },
    {
      "id": "term:energy-density",
      "type": "Term",
      "label": "Energy density",
      "properties": {
        "id": "energy-density",
        "name": "Energy density",
        "aka": [
          "volumetric energy density"
        ],
        "section": "topic-ratings",
        "definition": "Stored energy per unit volume, in watt-hours per litre. It is the figure that matters when space is the constraint, as in a phone or under a car floor; high-energy cylindrical cells pass 700 Wh/L.",
        "unit": "Wh/L",
        "related": [
          "specific-energy",
          "nominal-energy",
          "ragone-plot",
          "areal-loading"
        ],
        "lesson": "fundamentals/capacity-and-c-rate/#energy",
        "url": "https://lemonergy.com/learn/glossary/energy-density/",
        "mentions": []
      }
    },
    {
      "id": "term:specific-power",
      "type": "Term",
      "label": "Specific power",
      "properties": {
        "id": "specific-power",
        "name": "Specific power",
        "aka": [
          "power density"
        ],
        "section": "topic-ratings",
        "definition": "Deliverable power per unit mass, in watts per kilogram; power density is the same per litre. A cell is designed for energy or for power, rarely both: thin electrodes give power, thick ones give energy.",
        "unit": "W/kg",
        "related": [
          "power",
          "specific-energy",
          "ragone-plot",
          "areal-loading",
          "power-cell-energy-cell"
        ],
        "url": "https://lemonergy.com/learn/glossary/specific-power/",
        "mentions": []
      }
    },
    {
      "id": "term:electrode",
      "type": "Term",
      "label": "Electrode",
      "properties": {
        "id": "electrode",
        "name": "Electrode",
        "section": "topic-components",
        "definition": "A solid conductor where the cell’s reaction happens, in contact with the electrolyte. A lithium-ion cell has a negative electrode and a positive electrode, each a porous coating on a metal foil.",
        "related": [
          "negative-electrode",
          "positive-electrode",
          "porous-electrode",
          "current-collector"
        ],
        "lesson": "fundamentals/cell-anatomy/#components",
        "example": {
          "title": "Two transport paths",
          "text": "Electrons need connected solid paths to the collector; ions need electrolyte paths to reaction sites. More of one constituent displaces others at fixed volume."
        },
        "url": "https://lemonergy.com/learn/glossary/electrode/",
        "mentions": [
          "electrolyte",
          "coating"
        ]
      }
    },
    {
      "id": "term:separator",
      "type": "Term",
      "label": "Separator",
      "properties": {
        "id": "separator",
        "name": "Separator",
        "section": "topic-electrolytes",
        "definition": "A porous, electronically insulating film between the electrodes. Electrons cannot cross it; ions move through the electrolyte in its pores.",
        "related": [
          "electrolyte",
          "ceramic-coated-separator",
          "separator-shutdown",
          "internal-short-circuit",
          "porosity"
        ],
        "lesson": "fundamentals/cell-architecture/#separator",
        "example": {
          "title": "Different conduction paths",
          "text": "A separator prevents direct electronic contact while permitting ionic transport through its electrolyte-filled structure."
        },
        "url": "https://lemonergy.com/learn/glossary/separator/",
        "mentions": []
      }
    },
    {
      "id": "term:electrolyte",
      "type": "Term",
      "label": "Electrolyte",
      "properties": {
        "id": "electrolyte",
        "name": "Electrolyte",
        "section": "topic-electrolytes",
        "definition": "The ion-conducting medium between the electrodes. In a liquid-electrolyte cell it fills the pores of both electrodes and the separator, so it is not a separate structural layer.",
        "related": [
          "lithium-salt",
          "carbonate-solvent",
          "electrolyte-additive",
          "ionic-conductivity",
          "solid-electrolyte",
          "ionic-liquid-electrolyte"
        ],
        "lesson": "fundamentals/cell-architecture/#electrolyte",
        "example": {
          "title": "Ions and electrons",
          "text": "Electrolyte carries ions between electrodes; the external circuit carries electrons. The two paths serve different roles."
        },
        "url": "https://lemonergy.com/learn/glossary/electrolyte/",
        "mentions": [
          "separator"
        ]
      }
    }
  ]
}