{
  "node": {
    "id": "term:areal-loading",
    "type": "Term",
    "label": "Areal loading",
    "properties": {
      "id": "areal-loading",
      "name": "Areal loading",
      "aka": [
        "mass loading",
        "areal capacity"
      ],
      "section": "topic-components",
      "definition": "How much active material, or capacity, an electrode carries per square centimetre of foil, typically 2–5 mAh/cm². Higher loading raises energy density but lengthens the ion path, which limits fast charging.",
      "unit": "mAh/cm², mg/cm²",
      "related": [
        "coating",
        "energy-density",
        "fast-charging",
        "tortuosity"
      ],
      "example": {
        "title": "Convert mass and area",
        "text": "200 mg active material over 20 cm² gives 10 mg/cm² loading. State whether the measurement includes one or both coated sides."
      },
      "url": "https://lemonergy.com/learn/glossary/areal-loading/",
      "mentions": [
        "milliampere-hour",
        "electrode",
        "active-material"
      ]
    }
  },
  "edges": [
    {
      "id": "edge:580",
      "source": "term:areal-loading",
      "target": "topic:topic-components",
      "type": "belongsTo",
      "properties": {
        "sourceFile": "terms.json"
      }
    },
    {
      "id": "edge:581",
      "source": "term:areal-loading",
      "target": "term:coating",
      "type": "relatedTo",
      "properties": {
        "sourceFile": "terms.json",
        "meaning": "Related context; not a causal claim"
      }
    },
    {
      "id": "edge:582",
      "source": "term:areal-loading",
      "target": "term:energy-density",
      "type": "relatedTo",
      "properties": {
        "sourceFile": "terms.json",
        "meaning": "Related context; not a causal claim"
      }
    },
    {
      "id": "edge:583",
      "source": "term:areal-loading",
      "target": "term:fast-charging",
      "type": "relatedTo",
      "properties": {
        "sourceFile": "terms.json",
        "meaning": "Related context; not a causal claim"
      }
    },
    {
      "id": "edge:584",
      "source": "term:areal-loading",
      "target": "term:tortuosity",
      "type": "relatedTo",
      "properties": {
        "sourceFile": "terms.json",
        "meaning": "Related context; not a causal claim"
      }
    },
    {
      "id": "edge:mentions/areal-loading/milliampere-hour",
      "source": "term:areal-loading",
      "target": "term:milliampere-hour",
      "type": "mentions",
      "properties": {
        "sourceFile": "terms.json",
        "method": "build_glossary.mention_index + mentions",
        "field": "definition",
        "meaning": "Text mention; not a causal claim"
      }
    },
    {
      "id": "edge:mentions/areal-loading/electrode",
      "source": "term:areal-loading",
      "target": "term:electrode",
      "type": "mentions",
      "properties": {
        "sourceFile": "terms.json",
        "method": "build_glossary.mention_index + mentions",
        "field": "definition",
        "meaning": "Text mention; not a causal claim"
      }
    },
    {
      "id": "edge:mentions/areal-loading/active-material",
      "source": "term:areal-loading",
      "target": "term:active-material",
      "type": "mentions",
      "properties": {
        "sourceFile": "terms.json",
        "method": "build_glossary.mention_index + mentions",
        "field": "definition",
        "meaning": "Text mention; not a causal claim"
      }
    }
  ],
  "neighbors": [
    {
      "id": "topic:topic-components",
      "type": "Topic",
      "label": "Cell components and electrode materials",
      "properties": {
        "id": "topic-components",
        "name": "Cell components and electrode materials",
        "lede": "What a cell is physically made of — active materials, binders, additives, foils and tabs — and how its electrodes are put together.",
        "context": "Connect each material with its function.",
        "example": "Electrons travel through additive, foil and tab; ions use electrolyte and separator pathways.",
        "lesson_url": "https://lemonergy.com/learn/fundamentals/cell-anatomy/",
        "lesson_label": "Open cell anatomy"
      }
    },
    {
      "id": "term:coating",
      "type": "Term",
      "label": "Coating",
      "properties": {
        "id": "coating",
        "name": "Coating",
        "section": "topic-manufacturing",
        "definition": "Applying slurry to the moving foil at a controlled wet thickness, usually with a slot die, often on both sides. Coating weight per area must be held within about one percent across the web, because every downstream property depends on it.",
        "related": [
          "slot-die",
          "areal-loading",
          "drying",
          "electrode-manufacturing"
        ],
        "lesson": "fundamentals/cell-production/#electrodes",
        "example": {
          "title": "Wet and dry thickness differ",
          "text": "Wet coating includes solvent. Dry thickness also depends on retained solids and resulting structure."
        },
        "url": "https://lemonergy.com/learn/glossary/coating/",
        "mentions": [
          "slurry"
        ]
      }
    },
    {
      "id": "term:energy-density",
      "type": "Term",
      "label": "Energy density",
      "properties": {
        "id": "energy-density",
        "name": "Energy density",
        "aka": [
          "volumetric energy density"
        ],
        "section": "topic-ratings",
        "definition": "Stored energy per unit volume, in watt-hours per litre. It is the figure that matters when space is the constraint, as in a phone or under a car floor; high-energy cylindrical cells pass 700 Wh/L.",
        "unit": "Wh/L",
        "related": [
          "specific-energy",
          "nominal-energy",
          "ragone-plot",
          "areal-loading"
        ],
        "lesson": "fundamentals/capacity-and-c-rate/#energy",
        "url": "https://lemonergy.com/learn/glossary/energy-density/",
        "mentions": []
      }
    },
    {
      "id": "term:fast-charging",
      "type": "Term",
      "label": "Fast charging",
      "properties": {
        "id": "fast-charging",
        "name": "Fast charging",
        "section": "topic-charging",
        "definition": "Charging intended to replenish a specified amount of energy or state of charge in a short time. There is no universal C-rate threshold: performance depends on cell chemistry, temperature, starting state and power limits. High current can increase heating and lithium-plating risk, requiring appropriate limits.",
        "related": [
          "lithium-plating",
          "c-rate",
          "cc-cv-charging",
          "dc-fast-charging",
          "thermal-management",
          "mscc"
        ],
        "url": "https://lemonergy.com/learn/glossary/fast-charging/",
        "mentions": [
          "state-of-charge"
        ]
      }
    },
    {
      "id": "term:tortuosity",
      "type": "Term",
      "label": "Tortuosity",
      "properties": {
        "id": "tortuosity",
        "name": "Tortuosity",
        "abbr": "τ",
        "section": "topic-transport",
        "definition": "How winding the path through a porous layer is, compared with a straight line through it. High tortuosity means ions travel much further than the layer is thick, which limits how fast a thick, dense electrode can be charged or discharged.",
        "unit": "—",
        "related": [
          "porosity",
          "bruggeman-relation",
          "porous-electrode",
          "rate-capability",
          "ionic-path"
        ],
        "lesson": "fundamentals/cell-architecture/#porosity",
        "url": "https://lemonergy.com/learn/glossary/tortuosity/",
        "mentions": [
          "electrode",
          "winding"
        ]
      }
    },
    {
      "id": "term:milliampere-hour",
      "type": "Term",
      "label": "Milliampere-hour",
      "properties": {
        "id": "milliampere-hour",
        "name": "Milliampere-hour",
        "abbr": "mAh",
        "section": "topic-units",
        "definition": "One thousandth of an ampere-hour, the capacity unit used for small cells. A phone cell of 4500 mAh holds 4.5 Ah; multiplied by its nominal voltage that is about 17 Wh.",
        "unit": "mAh",
        "related": [
          "ampere-hour",
          "watt-hour"
        ],
        "url": "https://lemonergy.com/learn/glossary/milliampere-hour/",
        "mentions": [
          "nominal-voltage"
        ]
      }
    },
    {
      "id": "term:electrode",
      "type": "Term",
      "label": "Electrode",
      "properties": {
        "id": "electrode",
        "name": "Electrode",
        "section": "topic-components",
        "definition": "A solid conductor where the cell’s reaction happens, in contact with the electrolyte. A lithium-ion cell has a negative electrode and a positive electrode, each a porous coating on a metal foil.",
        "related": [
          "negative-electrode",
          "positive-electrode",
          "porous-electrode",
          "current-collector"
        ],
        "lesson": "fundamentals/cell-anatomy/#components",
        "example": {
          "title": "Two transport paths",
          "text": "Electrons need connected solid paths to the collector; ions need electrolyte paths to reaction sites. More of one constituent displaces others at fixed volume."
        },
        "url": "https://lemonergy.com/learn/glossary/electrode/",
        "mentions": [
          "electrolyte",
          "coating"
        ]
      }
    },
    {
      "id": "term:active-material",
      "type": "Term",
      "label": "Active material",
      "properties": {
        "id": "active-material",
        "name": "Active material",
        "abbr": "AM",
        "section": "topic-components",
        "definition": "The part of an electrode that actually stores lithium — graphite on the negative side, an oxide or phosphate on the positive. It makes up most of the electrode coating; the rest is binder and conductive additive.",
        "related": [
          "cathode-active-material",
          "anode-active-material",
          "binder",
          "conductive-additive",
          "specific-capacity"
        ],
        "lesson": "fundamentals/cell-architecture/#composite",
        "example": {
          "title": "Choose a mass basis",
          "text": "A 100 g coating containing 95 g active material has different specific-capacity numbers when normalized to active mass versus total coating mass."
        },
        "url": "https://lemonergy.com/learn/glossary/active-material/",
        "mentions": [
          "electrode",
          "graphite",
          "coating"
        ]
      }
    }
  ]
}